Taurus · Taurus Lever Hoists
Hover an image to enlarge it, click to open it full size.
Toco Lifting supplies Taurus lever hoist spare parts on request, and repairs, load tests and recertifies Taurus lever hoists in its own workshop. The correct part depends on the capacity and model of your hoist, so the Toco team confirms the right spares for the specific unit rather than working from a generic list. Inspections are carried out by an ECSA-registered Lifting Machinery Inspector, and the hoist is recertified following inspection.
Taurus lever hoist spare parts available on request from Toco Lifting, with repair, load testing and recertification in the Toco workshop. Supplied across South Africa and the SADC region from Germiston and Cape Town.
Buying for a site outside South Africa? Supplied Ex Works Germiston to buyers across the SADC region: how export supply works.
Toco Lifting supplies Taurus lever hoist spare parts on request and provides repair, load testing and recertification for Taurus lever hoists. Spares cover the Taurus range from 0.75 ton to 9 ton, HSH-0.75 to HSH-9.
Toco Lifting (Pty) Ltd is an approved Lifting Machinery Entity, LME No. 008, under Driven Machinery Regulation 18(5) of the Occupational Health and Safety Act, 1993, and re-inspects and recertifies lifting tackle in its own workshop under the oversight of an ECSA-registered Lifting Machinery Inspector, Anton van Staden (Reg. #201112078).
Need a part, a repair or a recertification? Call 011 345 8800 or email [email protected].
Spare parts are available on request across the Taurus lever hoist range. Because the correct component depends on the capacity and the model, the Toco team confirms the right spares for your specific unit rather than working from a generic list. Tell us the capacity and the model code and we will confirm availability.
| Capacity | Model | Fall configuration |
|---|---|---|
| 0.75 ton | HSH-0.75 | Single fall |
| 1.5 ton | HSH-1.5 | Single fall |
| 3 ton | HSH-3.0 | Single fall |
| 6 ton | HSH-6.0 | Double fall |
| 9 ton | HSH-9 | Triple fall |
Toco repairs chain blocks, lever hoists and hoists in house at the Germiston head office and the Cape Town branch. A hoist is stripped and assessed, worn components are replaced, and the unit is load tested and recertified before it returns to site. Toco provides both initial and after-sales support, so a hoist bought from Toco can be maintained, repaired and recertified by the same team that supplied it.
Lifting tackle must be re-inspected every three months under Driven Machinery Regulation 18(10)(e) of the OHS Act, and Toco recertifies hoists following inspection. Where a Performance (Load) Test Certificate is issued, it is valid for twelve months. Testing is carried out on Toco's own equipment at Germiston, with load cells SANAS calibrated to 100 tons. Full detail of the testing scope is on the Lifting Equipment Testing & Certification page.
Taurus lever hoists comply with SANS 1636, the standard covering the manufacture, design and performance testing of manually operated chain lever hoists, and run load chain complying with SANS 1592. SANS 500 governs the inspection, testing and examination of hand-operated chain blocks and lever hoists in use. Replacing worn components with the correct parts is what keeps a hoist performing to those standards.
LME No. 008 · LEEASA Standard Member #LEEASA-SUB-00102 · COET Member #8000134 · ECSA-registered LMI Anton van Staden #201112078 · SANAS-accredited load cell calibration · DMR 18(5) of the OHS Act, 1993.
Related products and services:
Taurus Lever Hoists ·
Taurus Chain Block Spare Parts ·
Vital® Lever Hoist Spare Parts ·
Chain Block & Hoist Repairs ·
Testing & Certification
Yes. Taurus lever hoist spare parts are available from Toco Lifting on request, across the Taurus range from 0.75 ton to 9 ton. The right part depends on the capacity and model of your hoist, so tell the Toco team what you have and they will confirm the correct spares and availability.
Yes. Toco repairs chain blocks, lever hoists and hoists in house at Germiston and Cape Town. The hoist is stripped and assessed, worn components are replaced, then the unit is load tested and recertified before it returns to site. Inspections are carried out by an ECSA-registered Lifting Machinery Inspector.
Lifting tackle must be re-inspected every three months under Driven Machinery Regulation 18(10)(e) of the OHS Act. Toco recertifies hoists following inspection. Where a Performance (Load) Test Certificate is issued, it remains valid for twelve months.
Yes. Load chain is a wearing component and can be replaced as part of a workshop repair. Taurus lever hoists run load chain complying with SANS 1592, and the hoist itself complies with SANS 1636. The unit is load tested and recertified before it returns to service.
Taurus is Toco's medium-duty, cost-effective range and Vital is the premium, heavy-duty range for which Toco is the sole authorised Southern African distributor. Spare parts for both are available on request, and both are repaired, load tested and recertified in the Toco workshop.
Toco services, repairs and recertifies lever hoists from its Germiston head office and Cape Town branch, supporting customers across South Africa and the wider SADC region. Need Taurus lever hoist spare parts, a repair or a recertification? Call 011 345 8800 or email [email protected] and the team will confirm the right parts and service for your hoist.
Taurus lever hoists are medium-duty hoists ergonomically designed for maximum output efficiency and safe operation, and fitted with an OLL (overload limiter). These portable lifting devices are used in factories, mines, farms, construction sites, wharves, docks and warehouses for a wide variety of lifting and materials handling operations. Capacities range from 0.75 ton to 9 ton.
Send the load, the lift and the duty cycle. The right unit comes back priced.
